|
|
Post by IU3NQN on Aug 3, 2020 14:15:56 GMT
Hello, when will we have the opportunity to listen to both channels simultaneously? Now listen only on the channel on which we open the PTT and the other below remains silent ... It would be nice to be able to hear the two channels together .. Thanks
|
|
|
|
Post by UB9MDA on Aug 13, 2020 2:18:35 GMT
Hello, when will we have the opportunity to listen to both channels simultaneously? Now listen only on the channel on which we open the PTT and the other below remains silent ... It would be nice to be able to hear the two channels together .. Thanks we have two stations and both have the same problem |
|
|
|
Post by Daniel VA2DG on Aug 13, 2020 3:19:38 GMT
the radio is dual display but not dual simultaneous receivers. It you have A on VHF example and B on a Uhf you can monitor the 2 frequency but only one will received at any time. either A or B.
|
|
|
|
Post by UB9MDA on Aug 13, 2020 4:10:08 GMT
the radio is dual display but not dual simultaneous receivers. It you have A on VHF example and B on a Uhf you can monitor the 2 frequency but only one will received at any time. either A or B. TS 1 one receiver, TS 2 second receiver, if there was a transmission on the first slot and stopped then on the second when a signal appears, it is not heard (( |
|
|
|
Post by IU3NQN on Aug 13, 2020 9:29:03 GMT
Ok, but if on my Retevis or Baofeng radio I put a channel A above and a channel B below, the radio tunes itself to the channel that is broadcasting at that moment ... And always listens to both channels. Kydera only listens to the channel on which I open a ptt, and ignores the "not open" channel altogether. It would be good for him to double listen all the time, not for a few seconds (when it happens to work) ...
|
|
|
|
Post by UB9MDA on Aug 13, 2020 15:51:02 GMT
Ok, but if on my Retevis or Baofeng radio I put a channel A above and a channel B below, the radio tunes itself to the channel that is broadcasting at that moment ... And always listens to both channels. Kydera only listens to the channel on which I open a ptt, and ignores the "not open" channel altogether. It would be good for him to double listen all the time, not for a few seconds (when it happens to work) ... I confirm !!!! kydera does not have two channels working correctly ((((((( |
|
dk5bm
New Member
Posts: 44
|
Post by dk5bm on Aug 17, 2020 16:11:59 GMT
Ok, but if on my Retevis or Baofeng radio I put a channel A above and a channel B below, the radio tunes itself to the channel that is broadcasting at that moment ... And always listens to both channels. No they doesn't. They're just doing a dual watch, means switching from A/B every 200ms or so and stop if there's activity.
The "real" Twin mode radios as far as I know are the Anytone mobile radio AT-D578UV and the Kydera DR-880UV (this one can also receive in the same band independently as I believe they have two seperate radios in one case).
|
|
|
|
Post by IU3NQN on Aug 17, 2020 19:06:00 GMT
Ok, but if on my Retevis or Baofeng radio I put a channel A above and a channel B below, the radio tunes itself to the channel that is broadcasting at that moment ... And always listens to both channels. No they doesn't. They're just doing a dual watch, means switching from A/B every 200ms or so and stop if there's activity.
The "real" Twin mode radios as far as I know are the Anytone mobile radio AT-D578UV and the Kydera DR-880UV (this one can also receive in the same band independently as I believe they have two seperate radios in one case).
Okay, the fact remains that the Kydera do not do it well .. Correct this in my opinion is a good radio |
|
|
|
Post by Daniel VA2DG on Aug 17, 2020 23:25:17 GMT
Well it is a good radio because it is very small foot print for today's car but it does lack some functionality, i was expecting that it would be like the DR-880 but it is now.
|
|
dk5bm
New Member
Posts: 44
|
Post by dk5bm on Aug 28, 2020 20:56:56 GMT
It's like a DR-8500UV in another case.
|
|
