DMR Simplex

SM7CKM
New Member

Posts: 11

DMR Simplex Aug 19, 2022 7:31:56 GMT

Quote

Post by SM7CKM on Aug 19, 2022 7:31:56 GMT

Try this for channel, choose Your own freq in RX and TXfreq.:
CHMODE:Digital, CHNAME:Anything, RXFREQ:144.85000, TXREQ:144.85000, POWER:Low, RXONLY:Off, ALARM: Off, PROMPT:Off, PCT:Patcs,RXTS:On, TXTS:On, RXCC:1, TXCC:1, MSGTYPE:Unconfirme, TXPOLICY: Polite to CC, GCL:Off (If You want to listen to other channels, create a RX Group with chanels You want to listen to, and choose the RX Group in GCL row), ENCRYPTION: Off, SCANLIST: Off, CONTACTS: Off, EAS: Off, APRS:Off

I dont remember but itt could be that You have to create a RXgrouplist to choose in GCL row.

Good luck, 73 SM7CKM

klaus New Member Posts: 3	DMR Simplex Oct 14, 2022 8:14:01 GMT Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by klaus on Oct 14, 2022 8:14:01 GMT RX TS and TX TS normally need to be set to "ON" rather then "TS 1" or "TS 2" as you would choose when using a repeater depending on the talk group you´d like to address.

g0faj New Member Posts: 5	DMR Simplex Jan 31, 2023 16:52:44 GMT Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by g0faj on Jan 31, 2023 16:52:44 GMT Thankyou both.. That is how I have set up my rig but still no luck.. What TG do you use on Simplex DMR ? I use TG9

eb3bkw Junior Member Posts: 70	DMR Simplex Feb 3, 2023 16:38:19 GMT Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by eb3bkw on Feb 3, 2023 16:38:19 GMT normally tg99

Post by SM7CKM on Aug 19, 2022 7:31:56 GMT

Post by klaus on Oct 14, 2022 8:14:01 GMT

Post by g0faj on Jan 31, 2023 16:52:44 GMT

Post by eb3bkw on Feb 3, 2023 16:38:19 GMT