|
|
Post by ricardop on Mar 24, 2022 20:40:28 GMT
I hope you can help me. In my Kydera cdr300uv equipment, I programmed repeater frequencies, but when I transmit nothing comes out even though the return of the repeater is heard. I have no problems in DMR or direct Analog. Only on repeaters.
|
|
s55g
New Member
Posts: 6
|
Post by s55g on Mar 25, 2022 10:00:14 GMT
I hope you can help me. In my Kydera cdr300uv equipment, I programmed repeater frequencies, but when I transmit nothing comes out even though the return of the repeater is heard. I have no problems in DMR or direct Analog. Only on repeaters. hAVE SAME PROBLEM HERE.... before was working nsmmooth and nice... now on radio is firmware version n 909E.D4.EARSAB.0101 F136-174,F400-480 23sep2021 DMR works OK alls DMR & simplex VHF +UHF working fine UHF Analog rpt works ok VHF Analog rtp (inserted in CPS in same manner and mode like UHF analog rpt just band /freq are diiderent and subtones on specific ch on tx & rx VHF analog rpt are RX ok ptt ok BUT no open rpt radio has programmed VHF rpt CH with +/- shift TX freq subtone an on TX transmiting out fine also local rpt is working fine (monitoring with other RXTX radio) but no engage-open VHF rpt (UHV CH rpt works ok) RPT Analog programed CH 145.625/145.025 RX/TX tsq123 in / out radio send out TX frq with subtone but no open rpt...rpt checked and works also tx on rt73 is ok and works correct frq and subtone pout... HAve some experiencxe in DMR and other radio programming and setting but this one is CHAMPION. in all aspects.... (searching for a proprer hammer just in case ...) Please anyone can tip a solution for this issue ..is there anythig more to set in radio or else.... TNX S55G Mike   |
|
|
|
Post by VE2DKA on Apr 20, 2022 16:10:18 GMT
Hi !
For me, sometime when I try to transmit on VHF Analog repeaters, my CDS-300 close himself !
Thanks !
|
|
