Post by IU2MWK on Jan 17, 2022 18:40:16 GMT
Hello to everyone
I just activated the "promiscuos mode" and try to receive some frequency on civil repeater (160-170 Mhz) but the radio seems to receive only one single slot (TS1 or TS2)... There's no problem if the Color Code changes
It's normal or is a bug of my radio?
So I compare the receiver (use an external good Comet GP3 dualband antenna) with another radio (Anytone 878 with original rubber antenna) and I discovered that my radio is mute and don't receive nothing.
There's an option to adjust the sensitivity of receiver?..The frequency and settings are correct : work always in simple mode and the rest of channel (same settings) don't have problem...Maybe the signal is too low?
Thanks for the help
Mario
IU2MWK
I just activated the "promiscuos mode" and try to receive some frequency on civil repeater (160-170 Mhz) but the radio seems to receive only one single slot (TS1 or TS2)... There's no problem if the Color Code changes
It's normal or is a bug of my radio?
So I compare the receiver (use an external good Comet GP3 dualband antenna) with another radio (Anytone 878 with original rubber antenna) and I discovered that my radio is mute and don't receive nothing.
There's an option to adjust the sensitivity of receiver?..The frequency and settings are correct : work always in simple mode and the rest of channel (same settings) don't have problem...Maybe the signal is too low?
Thanks for the help
Mario
IU2MWK
