APRS don't works, digital and analogical channels RX problem
Feb 28, 2021 10:34:05 GMT
EA3W likes this
Post by eb3bkw on Feb 28, 2021 10:34:05 GMT
Bugs detected (FEB / 28/2021):
-I could not get the APRS of the RT73 to work.
I have followed the instructions provided meticulously. My codeplug is well tested and my BM selfcare is correctly selected (chinesse radio, GPS ON, time 60 seconds).
I do not know of an RT-73 / Kydera CD300 owner who has reported that the APRS position report works well.
In my country (Spain), the Brand Maister network receives the APRS position report through TG 214999, and Slot 2 should preferably be selected, with a period of 60 seconds.
-A GCL must be selected for each digital channel. If none are selected, the radio DOES NOT RECEIVE. That's not normal. With my Motorola, TYT, Hytera, Anytone, Aillunce HD-1 and Retevis RT3 it is not like that.
It only receives if the PTT is activated momentarily.
Normally the TG that is selected in a digital channel is RX and TX, therefore, without having selected a GCL (RX group list) the programmed TG would have to be heard. And that does not happen. You must have a GCL selected on that channel to have reception on the channel's TG. Although that TG is not added in that GCL. This is not normal, it is a bug or a misinterpretation by the radio software / firmware developer.
-If a CTCSS from RX is selected on an analog channel, the radio does not receive.
Please correct these important errors.
Besides, the instability of the CPS, random crashes of the fw.
For the rest, well, the radio is improving, although very little by little.
-
If anyone has gotten the digital APRS to work on BM, please say so, many people read this forum, but few answer ...
Thanks
FW/CPS (28/GEN/2021)
CPS 9.1.170
V2.1.26
Bugs reported directly to Yami (Retevis)
Adam, can you report this to Kydera?
Hopefully, using two ways, the software/firmware developers will correct the bugs.
Thank you in advance
-I could not get the APRS of the RT73 to work.
I have followed the instructions provided meticulously. My codeplug is well tested and my BM selfcare is correctly selected (chinesse radio, GPS ON, time 60 seconds).
I do not know of an RT-73 / Kydera CD300 owner who has reported that the APRS position report works well.
In my country (Spain), the Brand Maister network receives the APRS position report through TG 214999, and Slot 2 should preferably be selected, with a period of 60 seconds.
-A GCL must be selected for each digital channel. If none are selected, the radio DOES NOT RECEIVE. That's not normal. With my Motorola, TYT, Hytera, Anytone, Aillunce HD-1 and Retevis RT3 it is not like that.
It only receives if the PTT is activated momentarily.
Normally the TG that is selected in a digital channel is RX and TX, therefore, without having selected a GCL (RX group list) the programmed TG would have to be heard. And that does not happen. You must have a GCL selected on that channel to have reception on the channel's TG. Although that TG is not added in that GCL. This is not normal, it is a bug or a misinterpretation by the radio software / firmware developer.
-If a CTCSS from RX is selected on an analog channel, the radio does not receive.
Please correct these important errors.
Besides, the instability of the CPS, random crashes of the fw.
For the rest, well, the radio is improving, although very little by little.
-
If anyone has gotten the digital APRS to work on BM, please say so, many people read this forum, but few answer ...
Thanks
FW/CPS (28/GEN/2021)
CPS 9.1.170
V2.1.26
Bugs reported directly to Yami (Retevis)
Adam, can you report this to Kydera?
Hopefully, using two ways, the software/firmware developers will correct the bugs.
Thank you in advance
