laser
New Member
I have RT73
Posts: 13
|
Post by laser on Dec 27, 2020 10:52:45 GMT
I tried to configure the transmission of GPS coordinates through brandmeister.network/. the radio turns on the GPS, the red icon turns green, synchronizes the time and transmits the data. my hotspot records data transfer, as if all is well. in "selfcare" I set up the reception of coordinates as "Chinese radio", but the display on aprs.fi never happened. there may be some problems in the network itself, it is possible... but then after turning off the GPS, I noticed that the radio periodically displays the message like "transmit GPS coordinates". it is unclear why. so for now I have forcibly disabled this feature in the settings so as not to interfere. has anyone tried to use geolocation? my FW RT73 109E.D4.EARSAB.007. NOV 30 2020 14:21:34 |
|
|
|
Post by Daniel VA2DG on Dec 31, 2020 1:48:47 GMT
Their is no FW out to general Public with APRS working yet.
But it is comming soon. It is under test right now and they are fine tuning the FW and CPS.
Stay tune.
|
|
laser
New Member
I have RT73
Posts: 13
|
Post by laser on Jan 1, 2021 12:58:47 GMT
I meant the DPRS by DMR. but if there is any support for the APSR via AX.25 - it will be even more fun (although in my opinion it is not real).
|
|
|
|
Post by Daniel VA2DG on Jan 1, 2021 13:48:18 GMT
I meant the DPRS by DMR. but if there is any support for the APSR via AX.25 - it will be even more fun (although in my opinion it is not real). Hi Laser First the A in APRS does not mean Analog. APRS is Automatic Packet Reporting System Kydera will support only Digital APRS with the new Firmware. Hope Kydera will be able to figure out a way to do Analog APRS in future FW. |
|
laser
New Member
I have RT73
Posts: 13
|
Post by laser on Jan 10, 2021 14:08:16 GMT
#RetevisRT73 latest firmware adds digital APRS function. Retevis RT73_FW_20201230. Download link: www.ailunce.com/ResourceCenter/I immediately updated the firmware and checked it, because everything was configured earlier, it worked immediately. however, the numerical ending in the call sign does not add ... although on the BM everything is set correctly -7. well, at least! works now.  |
|
|
|
Post by Daniel VA2DG on Jan 11, 2021 2:56:00 GMT
Well it seem to work now
2021-01-10 10:50:48 EST: UR3PDA-7>APBM1D,DMR*,qAS,VA1DMR-10:@155045h5045.27N/02518.63Ev250/000Mobile DMR RT73
2021-01-10 10:55:48 EST: UR3PDA-7>APBM1D,DMR*,qAS,VA1DMR-10:@155545h5045.27N/02518.59Ev291/003Mobile DMR RT73
2021-01-10 11:00:48 EST: UR3PDA-7>APBM1D,DMR*,qAS,VA1DMR-10:@160045h5045.27N/02518.67Ev306/001Mobile DMR RT73
2021-01-10 11:05:58 EST: UR3PDA-7>APBM1D,DMR*,qAS,VA1DMR-10:@160555h5045.27N/02518.66Ev306/000Mobile DMR RT73
|
|
