Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 9, 2020 12:22:34 GMT
very bad, last firmware Nov 2020 installed, but this behavior is scary
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 6, 2021 21:11:35 GMT
|
|
|
|
Post by Daniel VA2DG on Feb 6, 2021 21:25:47 GMT
very bad, last formware Nov 2020 installed, but this behavior is scary What FW were you usig for this problems ? Please always state the exact firmware Date and CPS # when you report issue. |
|
|
|
Post by Daniel VA2DG on Feb 6, 2021 21:26:39 GMT
Again please state the Firmware date you have on Screen of your radio when reporting issue. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 6, 2021 21:29:32 GMT
Did you see my link to the Retevis firmware file?
there you should see
RT73_FW_20210203
So if the behavior is the same I made no new video , I explained it in my post ok?
|
|
|
|
Post by Daniel VA2DG on Feb 7, 2021 4:04:44 GMT
Did you see my link to the Retevis firmware file? there you should see RT73_FW_20210203 So if the behavior is the same I made no new video , I explained it in my post ok? Yes i saw your link but i dont have time to look and download FW. Also often FW date in the files name does not always correspond to the real date of the FW. So this is why we ask everyone that report issues to start your post with the detail we ask. Retevis is one thing and Kydera is another. You said the latest Retevis FW has this issue in your RT73 and also in CDR300 so problem is Retevis FW. For your CDR300 just get the latest official Kydera FW and test. Please review this post below.
I dont want to repeat myself on every post.
This advice is good for everyone that report an issue.kydera-ham.boards.net/thread/133/mandatory-firmware-version-required-posting |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 7, 2021 8:16:41 GMT
even with F.136-400 Jan 26.2021 the same issue on Kydera GD 300.
Its very intresting if you compare the firmware Retevis and Kydera from the past since today.
In the past they where very simmilar, the both last releases show, that Retevis did spend it more code lines
From offset 010FB it varies , but you see that large parts are the same.
Next I will examine the last CPSs from Kydera and Retevis, will see whats different.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 7, 2021 10:09:14 GMT
Daniel extra for you , so its proofed
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 7, 2021 12:58:50 GMT
are you working with a hotspot? Use it at a real and SAME repeater DMR+ with TS1 at VFO1, TS2 at VFO2.
You will be surprised, this behavior can be understood, not only with my person, several hams have it and Vivian from Retevis confirmed the issue without solution till today
In my opinion the TS1/TS2 assignment in the preamble is not clean (perhaps due to a timing problem), when putting in single VFO no problem at all...
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 7, 2021 13:00:44 GMT
aha during my answer Daniel you have deleted your post, but I got your video at all and have seen it...
|
|
|
|
Post by Daniel VA2DG on Feb 7, 2021 22:48:19 GMT
yup i delete because the video did not show up properly. but the test i did on the video was on BM Network
i am suspecting DMR+
i dont use DMR+ here.
|
|
