|
|
Post by ZL2NAT on Jul 19, 2020 23:15:40 GMT
The volume resets after power off and on.
Wont stay at the volume you left it at.
|
|
|
|
Post by ZL2NAT on Jul 19, 2020 23:55:24 GMT
Have reported to Kydera.
As a interim fix (if loud volume when turn radio on) :
-Press VOL then change to what VOL you want.
-Then Hold B key (far right, top of radio).
-Radio screen with Flick.
Now when radio turn off and on, it will reset to what you have set VOL to be.
|
|
|
|
Post by Daniel VA2DG on Jul 22, 2020 3:35:25 GMT
In my case it seem to hold when i set it.
If i lower it to 3 exemple. and power off and back on it stay at 3.
this is the one with FW July 1st, will try on the #2 with Jun FW to see if it work or not
|
|
|
|
Post by VA3HJ, Valens on Aug 1, 2020 15:29:29 GMT
Using V2. 1
Still not fix
|
|
|
|
Post by chocolates on Sept 20, 2020 13:08:27 GMT
hi to all
spiros m6wym
the problem i have with is the sound
in analog mode works ok but they not working on digital mode
any help please any one;
thanks
73
|
|
|
|
Post by do1jjb on Jun 9, 2021 15:42:56 GMT
I found that setting a volume, reading out the CP with the CPS and writing that CP back, saved my volume setting. I have tested that for 2 different volume levels. Hypothesis: this seems to be a hidden setting in the CP data.
I have a RT73 witrh FW from 29.03.2021. |
|
|
|
Post by Dave MM7DBT on Jun 9, 2021 17:44:35 GMT
The radio saves the current volume if you; Press the volume button, change volume with the knob and then press the knob in.
Then the volume will stay at that level after reboot and removing power.
If you change volume and just let it timeout, I think it's only temporary and will return to previous volume after reboot.
|
|
rudy
New Member
Posts: 49
|
Post by rudy on Jun 9, 2021 19:23:33 GMT
Have reported to Kydera. As a interim fix (if loud volume when turn radio on) : -Press VOL then change to what VOL you want. -Then Hold B key (far right, top of radio). -Radio screen with Flick. Now when radio turn off and on, it will reset to what you have set VOL to be.
sorry what is this ?
" -Then Hold B key (far right, top of radio).
-Radio screen with Flick."
key B ? and Flick what is ?
the same in my radio, in the CPS i set the volume on 10, but when power-on the volume is on 5 !! why ?
and i turn the volume to 8 ,,, power off but when i power-on RETURN to 5 .
not good , why this ?
|
|
|
|
Post by Dave MM7DBT on Jun 9, 2021 20:43:57 GMT
The answer is what I said above.. Also see my video comment to your Facebook post, Letting it timeout, stop flashing, or pressing the B(E) button on the top right doesn't save the volume. It does save if you hold it but then it will sometimes go into the menu or channel settings.. Just press the rotary knob in, power off and on the radio and voila, saved volume. Should be fairly self explanatory since the knob is what you use in the menu for ok/save  |
|
