TG Monitoring drops

py2bil
New Member

Posts: 5

TG Monitoring drops Sept 7, 2020 23:28:57 GMT

Quote

Post by py2bil on Sept 7, 2020 23:28:57 GMT

CPS: 9.1.142
Firmware: 109E.D4.EARSAB.005 Aug 25 2020

After a short time listening to a QSO the TG I have selected will stop receiving. I can see on my monitoring system that somebody is having a QSO, but the radio is not showing anything. Selecting another channel and then back brings the QSO back, but I lose it again after it switches over to the other party.

What I'm doing wrong here?

Thanks
73 de Bill, PY2BIL

Last Edit: Sept 13, 2020 21:14:11 GMT by py2bil

py2bil
New Member

Posts: 5

TG Monitoring drops Sept 13, 2020 18:39:11 GMT

Quote

Post by py2bil on Sept 13, 2020 18:39:11 GMT

Well, I guess nobody had this issue or nobody found a workaround/solution to it. I kept trying a few things and found out that by turning TOT off the issue went away. So TOT seems to not only affect TX (as it should) but also RX in this wired way.

Just documenting here in case somebody stumbles upon the same issue in the future.

73 de Bill, PY2BIL

K6QYF New Member Posts: 29	TG Monitoring drops Sept 14, 2020 4:54:38 GMT Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by K6QYF on Sept 14, 2020 4:54:38 GMT Same issue here too....you did the right thing as did I....another glitch that needs to be worked out....

Geoff - N7GPB New Member Enjoying learning about the Kydera 300uv and help others. Posts: 1	TG Monitoring drops Sept 15, 2020 16:28:14 GMT Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Geoff - N7GPB on Sept 15, 2020 16:28:14 GMT My understanding it's an issue with the TOT. Turn off TOT and see if it helps. It seemed to make a difference for me and was shared with me by another Kydera user that I'm in a group with.

Post by py2bil on Sept 7, 2020 23:28:57 GMT

Post by py2bil on Sept 13, 2020 18:39:11 GMT

Post by K6QYF on Sept 14, 2020 4:54:38 GMT

Post by Geoff - N7GPB on Sept 15, 2020 16:28:14 GMT