f4faa
New Member
73 Laurent
Posts: 13
|
Post by f4faa on Aug 29, 2020 8:13:11 GMT
Hi
Catherine sent me a new firmware this morning
( C7000_DR300UV_20W_20200827 NEW)
do you have any info on this firmware? regards 73
|
|
dk5bm
New Member
Posts: 44
|
Post by dk5bm on Aug 29, 2020 8:37:47 GMT
This test firmware removes the dual-standy bug if you have the problem that the radio never receive/switch to the second band even there's activity. I have tested this firmware the last days and it works perfect for me.
73
Bernd
DK5BM
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 29, 2020 8:49:53 GMT
What firmware?
Bruce
VK2RT
|
|
f4ewi
New Member
Posts: 1
|
Post by f4ewi on Aug 29, 2020 11:13:09 GMT
this firmware :  first remark, the time synchronization with the GPS works for me in manual mode : Menu -> Appendix -> GPS -> Calibrator -> Manual -> UTC+2 (in my case)   73s Thierry - F4EWI |
|
|
|
Post by Daniel VA2DG on Aug 29, 2020 15:30:22 GMT
Again i repeat what Nate said
IF you get a firmware directly from Kydera then it is for your own usage and you are not allowed to distribute is to others
It will be made public either by Kydera on their own Download Area or on this Forum.
Any other source should be avoid.
Thank you
|
|
f4faa
New Member
73 Laurent
Posts: 13
|
Post by f4faa on Aug 29, 2020 15:49:48 GMT
I did not upload the new firmware I just asked a question about the new features it brings
73
Laurent
|
|
dk5bm
New Member
Posts: 44
|
Post by dk5bm on Aug 29, 2020 17:40:57 GMT
Laurent,
for what reason have you received this firmware ? As I mentioned before it'll eliminate the bug that the second frequency will not be active at any time even you're moving the arrow inside. Only ptt, squelch or other action will make it active. At the same time the other band will go asleep.
If you don't have this problem you don't need this firmware and are good with the one from Aug. 21st.
73
Bernd
DK5BM
|
|
f4faa
New Member
73 Laurent
Posts: 13
|
Post by f4faa on Aug 29, 2020 17:43:39 GMT
Laurent, for what reason have you received this firmware ? As I mentioned before it'll eliminate the bug that the second frequency will not be active at any time even you're moving the arrow inside. Only ptt, squelch or other action will make it active. At the same time the other band will go asleep. If you don't have this problem you don't need this firmware and are good with the one from Aug. 21st. 73 Bernd DK5BM Catherine sends me all the firmwares I have been in contact with her for a very long time |
|
dk5bm
New Member
Posts: 44
|
Post by dk5bm on Aug 29, 2020 17:52:48 GMT
Catherine sends me all the firmwares I have been in contact with her for a very long time Understand, like me and Tina since I bought a DM-760 a few years ago  |
|
